Filter
Top Products
9
Installing Book Cards
Your unit contains a built-in
book. You can purchase more
titles on book cards at
www.franklin.com. To install a
book card, follow these steps.
1.Turn your unit off and turn it
over.
2.Remove the blank protector
or any other book card that
might be installed.
3.Align the tabs on the book
card with the notches in the
slot.
4.Press the book card down
until it snaps into place.
Warning: Never install or
remove a book card while your
unit is on. Any information that
was entered in the built-in book
or book card will be erased.
➤ Book Card Troubleshooting
If your book card is performing
erratically, follow the reset
instructions on page 50. If this
does not fix the problem,
remove the book card and
then remove the white rubber
strip located between the two
metal pins. Clean the rubber
strip with your fingers and then
replace it making sure it is
completely in its notch.
Installing Book Cards