Filter
Top Products
You can use a password to keep the
information in the Phone List private.
The password is requested when the
unit is turned on and the Phone List is
accessed.
Password Warnings
Warning! After you set the password,
you must enter the password to access
the phone list for the first time during a
session. Always record your password
and keep it in a separate place.
If you forget the password, you must
reset the unit to access the phone list.
Warning! Resetting the unit erases all
user-entered information. Always keep
written copies of your data.
If you do not have a reset button locat-
ed on the back of your unit, remove the
batteries, wait at least two minutes, and
then re-install them. For battery instruc-
tions, see
Installing the Battery
on page
5.
If you have a reset button, use the end
of a straightened paper clip to gently
press the reset button.
If the unit does not reset after pressing
the reset button, follow the above
instructions for removing the batteries.
➤ Password Setup
1. Press DATA.
2. Press or to see
Set
Password
and press ENTER.
3. Type a password and then press
ENTER.
Your password can have up to 8
characters.
You are prompted to retype your
password, and press ENTER to
confirm.
4. To test the password, press
ON/OFF twice, press DATA, type
the password, and press ENTER.
5. To disable the password, repeat
Steps 1 and 2 above, and press
ENTER when
Enter Password
displays.
Using a Password
16