Filter
Top Products
freeView Pro X10P User Manual
1 General Information
1.1 Overview
The freeView X10P is designed to allow users to access a computer from up to 500 feet (236
meters) away. By allowing keyboard, mouse, and video signals to travel over standard
Category 5 Ethernet cable, the transmitter and receiver pair facilitates secure remote access
without installing additional cables.
The freeView X10P is ideal for accessing servers located in server rooms that are difficult to
work in or inaccessible due to environmental conditions, security concerns, or space limitations.
Alternatively, multiple freeView X10P units can also be used to control computers in different
locations (e.g. board room, demonstration room, server room) from a single location.
Additionally, the freeView X10P can be connected to an existing analog KVM (keyboard-video-
mouse) installation to provide remote access to all of the servers connected to the KVM.
With both a local and a remote port on the unit, the freeView X10P allows a user to control both
a local computer at their desk, along with a remote computer, with a simple hotkey command to
switch between the two. The freeView X10P works with Category 5 Shielded Twisted Pair
(STP), Unshielded Twisted Pair (UTP), Category 5e, 6, and 7 cables.
1.2 Safety Instructions
If one of the following situations arises, the equipment should be checked by service personnel.
• The power adapter is damaged.
• Liquid has leaked into the equipment.
• The equipment has been exposed to excessive moisture.
• The equipment does not work properly and you can not get it to work after reading this
manual.
• The equipment has been dropped and damaged.
• The equipment shows obvious signs of damage.
1.3 Package Contents
The complete freeView X10P package consists of:
• freeView X10P Transmitter
• freeView X10P Receiver
• 3-in-1 PS/2 KVM cable
• Power Adapter
• User Manual
Ensure that the unit was not damaged during shipping. If you encounter a problem, please
contact your dealer.
Read this manual thoroughly, and follow the installation and operation procedures carefully to
prevent any damage to the product and/or any of the devices connected to it.