4
Hardware Installation
Before starting with the installation process, please TURN OFF all connected
peripherals and computers.
Windows XP/ME/2000/NT/Server 2003 users:
Remark: Windows NT4.0 does not support USB
1. Connect the keyboard, VGA, mouse, and audio cables from the KVM switch into
the computer ports.
2. Connect the keyboard, VGA monitor, mouse and audio devices into the console
port of KVM switch
3. Turn on the computers. Once the computers have finished the boot-up process,
you may begin using the KVM switch.
NOTE
Do not switch the
computer port
and/or run the hot
key command(s)
while your
computer is
booting-up.