Filter
Top Products
7
Usage
The LEDs on the KVM top surface represents the number of the active computer
supported. When using the Hot-Key commands, the indicators light up to specify
the connected/monitored computer. Only one LED indicator lights up at a time.
Keyboard Hot Key Commands:
You can conveniently instruct the KVM to switch ports through simple key
sequences. When sending commands to the KVM switch you must press the
SCROLL LOCK twice within 2 seconds. The following illustrates the hot key
commands.
Select Computer port:
Auto Scan Mode:
To leave Auto Scan Mode, press any key or the SPACE bar on your keyboard.