Filter
Top Products
15
What to do when a ‘document jam’ error occurs
1.Open the scanner cover to remove the
original.
2.Reinsert the original until it stops, and
press the start/stop key.
If the original is not placed into the scanner until it stops, an error
may occur.
4
Move the cutter in a downward horizontal sliding
motion while holding the paper out from the printer.
Press the start/stop key to scan the
original. The printing process will
begin.
If you wish to stop printing mid-way press the start/stop key
again.
When the printing process is complete,
cut the print with the paper cutter.
Make sure the original is placed firmly along
the document guide closest to you, and into
the scanner until it stops.
Place the original into the document
bay face down.
Press the contrast key to select the
level of contrast desired.