Filter
Top Products
46
When “AUDIO SETUP” is selected
1
2
See pages 31, 32.
Use the
•
and
ª
cursor buttons to select the desired setting, then press
the ENTER button.
AUDIO CHANNEL
Use this to adjust for the connected speaker systems.
DIGITAL OUTPUT
Use this to select the digital output’s signal format.
LPCM (44.1 kHz/48 kHz)
Use this to set the digital audio output when playing DVDs recorded in
linear PCM audio.
SOURCE DIRECT
This permits a setting to output the audio without adding speaker
settings to the audio signals of DVD audio or Super Audio CD.
BASS ENHANCER
Set whether or not to output audio signals from the subwoofer when
playing two-channel audio signals.
The BASS ENHANCER settings do not apply to digital outputs.
COMPRESSION
Use this to set the dynamic range output when playing discs.
SACD FILTER
The low pass filter value when playing Super Audio CDs can be set.
AUD IO SETUP
AUDIO CHANNEL
DIGITAL OUTPUT
LPCM(44.1kHz/48kHz)
BASS ENHANCER
SACD FILTER
M
ULT I CHANNEL
NOR
M
AL
OFF
OFF
SOURCE D IRECT
EXIT SETUP
OFF
OFF
50kHz
COMPRESSION
DECISION:ENTER BUTTONSELECT:
Remote control unit Remote control unit
The audio channel, digital output, LPCM conversion mode and source
direct bass expand items cannot be selected when DENON LINK or
IEEE1394 is selected or when the HDMI audio is “MULTI (NORMAL)”.