Filter
Top Products
5
Keep this device away from magnets or other objects that generate a magnetic
field and away from wireless equipment or other devices that emit electrical signals
as such equipment could cause this device to malfunction.
Dropping or bumping the device during operation or transportation could result in
strong shocks or vibrations that could cause faults or damage.
Do not move the device while it is operating or while an MO disk is inserted in the
device as this could damage the MO disk. When moving the device, be sure to
remove the MO disk first.
Because the use of this device in close proximity to a radio or television receiver
could disrupt signal reception, it should not be set up close to such equipment. It
should also be kept away from other devices that are sensitive to electrical signals
as it could cause such devices to malfunction.
Take care not to install the device in locations affected by strong vibrations or large
amounts of dust or in locations where chemicals are sprayed as this could result in
device faults.
Do not use this device in locations subject to extremely high (or low) temperatures,
in very humid locations, in direct sunlight or near heating appliances (heaters,
cooking appliances, etc.) as this could cause device faults. Note also that because
sudden changes in temperature can result in condensation-related faults, allow the
ambient temperature to stabilize before using the device.
Because it uses a cache write function, this device continues to operate even after
writing has finished on the computer. Do not switch the device off or eject the disk
while the access light is flashing as this could result in device damage or faults, or
physical damage to the MO disk and/or the data on the disk.
Unanticipated malfunctions or damage occurring during an MO disk read/write
operation can cause the data on the MO disk and/or the data that was being
read/written to be unrecoverable. The data involved should be backed up
beforehand as a precautionary measure. Also, be sure to write-protect MO disks
containing important data and programs.
Do not place objects on top of this device as this could scratch or damage the
device.
Do not put anything (floppy disks, etc.) other than MO disks into the slot as this
may cause damage or a fault.
Eject the MO disk before connecting or disconnecting the MO drive from your
computer.
Avoid sources of
strong magnetic fields
and electrical signals.
Do not drop or bump
the device.
Remove the MO disk
before moving the
device.
Avoid equipment that is
sensitive to electrical
signals.
Install the device
appropriately.
Do not use in conditions
or places where there
are extremes of
temperature or
humidity.
Do not operate the
device during MO disk
read/write operations.
Back up your data.
Do not place objects
on the device.
Do not insert objects
(other than MO disks)
into the device.
Handle MO disks
carefully.
Cautions