Filter
Top Products
3-4
3.3 REPLACING THE ADF SNAP-IN PAD MODULE
After scanning approximately 150,000 pages through the ADF, the pad spring may be worn out
and you may experience problems with document feeding. In this case, it is highly recommended
to replace the pad module with a new one. For ordering the pad module, please consult your
nearest dealer and follow the procedure below to replace it.
Disassembling Procedure
1. Open the ADF front cover by depressing the ADF release button.
2. Remove the ADF snap-in pad module by pulling out the upper part of the pad clamp as
shown in Figure 3-3.
Figure 3-3 Remove the pad module
ADF Release
Button
ADF Unit
Upper Part of ADF Pad Clamp
ADF
Cover