Fujitsu A512 Laptop User Manual


 
Removing and installing components
during servicing
Removing and installing compo
nents
during servicing
Only qualied technicians should repair your notebook. Unauthorised
opening or incorrect repa ir may greatly endanger the user (electric shock,
re risk) and will invalidate your warranty.
Components
Servicing
After consulting the Hotline/Service De sk, you m ay re move and install the
components described in this chapter yourself.
If you remove and install components w ithout consulting the Hotline/Service
Desk, then the warranty of your notebook will be voided.
Notes on installing and removing boards
and components
Switch the notebook off and pull the power plug out of the mains socket.
Always remove the battery.
Take care when you use the locking mechanisms on the battery and any other component.
Never use sharp objects such as screwdrivers, scissors or knives as leverage to remove covers.
NotesBoardESD
Boards with electrostatic sensitive devices (ESD) are marked with the label
shown.
When handling boards tted with ESD s, you m ust a lways observe the following
points:
You must always discharge static build up (e.g. by touching a grounded
object) before working.
The equipment and tools you use must be free of static charges.
Remove the power plug from the mains supply before inserting or removing
boards containing ESDs.
Always hold boards with ESDs by their edges.
Never t ouch pins or conductors on boards tted with ESDs.
Fujitsu 49