Filter
Top Products
Removing and installing components
during servicing
Attaching the cover
1
2
2
► Place the cover in the correct m ounting position (1).
If you remove m ore than one component at the same time, keep the screws for the
individual components separately from each other and make sure that you use the
correct screws. If you install the wrong screws, components may be damaged.
► Tighten the screws (2).
► Inser t the ba
ttery (see Chapter "Inserting battery", Page 31).
Finishing component removal
After y ou have removed or changed the system components as you required, please
prepare your device for operation again as follows:
► Install the battery again (see "
Insertin g battery " , Page 31).
► Turn the
notebook the right way up ag ain and place it on a flat surface.
► Reconnect the cables that you disconnected before.
56 Fujitsu