Filter
Top Products
SCENICVIEW B17-3/B19-3/P19-3
Connecting cables to the monitor
The monitor ports are protected by a cover.
► Remove the cover.
1 532
4 6
7
7
1 = Power connector
2 = DVI-D connection socket (DIGITAL)
3 = D-SUB connection socket (ANALOG)
4 = Security slot for "Kensington Lock"
5 = AUDIO-IN connector
6 = Cover position
7 = Holes for fixing swivel arm or wall bracket
The data cables supplied have two 15-pin D-SUB connectors / two 24-pin DVI connectors for
connection to the monitor and to the computer.
► Select the suitable data cable for your computer.
Digital graphics card with DVI interface: DVI connector
Graphics card with VGA interface: D-SUB connector
Information on the computer connections and interfaces is contained in the operating manual
for your computer.
► Connect one of the connectors of the data cable to the D-SUB connector (3) or the DVI-D
connector (2) on the monitor and secure the plug-in connection by tightening the safety screws.
The monitor automatically detects the input when only one signal source is connected.
i
► Insert one plug of the audio line in the AUDIO IN (5) socket on the monitor and make sure it is
properly engaged.
► Plug the power cable supplied into the power connector (1) of the monitor.
► Mount the cover over the connections.
A lock (Kensington Lock) can be mounted in the security slot (4) to protect the monitor
from theft. A Kensington Lock is not included in the consignment of the monitor.
i
A26361-K1143-Z120-1-7619, edition 3 13