Filter
Top Products
7
Primary Master Submenu of the Main Menu
The Primary Master submenu identifies what primary
devices are installed.
Note that actual hard drive label shown may vary.
Depending on the drive type, information such as cylin-
ders, heads and sectors may also be displayed.
Figure 3. Primary Master Submenu
Menu Field Options Default Description
Type: • Auto
• None
[Auto] Selects the Serial ATA/IDE device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is selected, all of
the following Set-up items do not appear.
Multi-Sector
Transfers:
• Disabled
• 2 Sectors
• 4 Sectors
• 8 Sectors
• 16 Sectors
[Disabled] The best option is selected by the BIOS automatically when Auto is
selected and cannot be selected by the user. Specifies the number of
sectors per block for multiple sector transfer.
LBA Mode
Control:
• Disabled
• Enabled
[Disabled] The best option is selected by the BIOS automatically when Auto is
selected and cannot be selected by the user. Enables or disables Logi-
cal Block Addressing in place of Cylinder, Head, Sector addressing.
PhoenixBIOS Setup Utility
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
Main
Item Specific Help
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Primary Master [UJDA760 DVD/CDRW-(PM)]
Type: [Auto]
Multi-Sector Transfers: [Disabled]
LBA Mode Control: [Disabled]
Transfer Mode: [Standard]
Ultra DMA Mode: [Disabled]
▲
Main Menu