Filter
Top Products
6-1
Activating the Setup Mode
This section describes how to activate the setup mode.
1 Turn the power ON. Then the scanner
displays “Scanner Ready” on LCD.
2 If the scanner is M3097DG, go to the
procedure 3. Press then the scan-
ner (M3097DE) displays Screen M2.
3 Press then the scanner displays
Screen M3.
4 Press then the scanner displays
Screen M4.
5 Press . Now the scanner is at
Screen 41 (page 6-3) in Setup mode.
<Screen M1>
<Screen M2>
<Screen M3>
<Screen M4>
NOTE
Any time you press , you can return to “Scanner Ready” screen.