Filter
Top Products
6-6
Reset of abrasion counter
When you reset the abrasion counter, you must set as follows:
1 Press or and let the
scanner display Screen 43.
2 At Screen 43;
If you want to reset the abrasion counter,
select “Yes” by or button and
press . Go to procedure 3.
If you do not want to reset the abrasion
counter, select “No” and press .
Finally press to return to “Scanner
Ready” screen.
3 At Screen 43-1;
If you want to reset the abrasion counter,
select “Yes” and press . If you do
not want to reset, select “No” and press
.
Setting pick start time
When you set the pick start time, you must set as follows:
1 Press or and let the
scanner display Screen 44.
2 At Screen 44, press to increase the
Pick start time or press to decrease
the Pick start time. Then press to
activate the setting. Finally press to
return to “Scanner Ready” screen.
<Screen 43>
<Screen 43-1>
<Screen 44>