Filter
Top Products
22
LifeBook E Series BIOS
Exiting from the Security Menu
When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to
another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to
another menu, use the cursor keys.
Table 14: Fields, Options and Defaults for the Security Menu
Menu Field Options Default Description
Supervisor
Password is:
–— Clear A display-only field. Set is displayed when the system supervisor password is set
and Clear when it is not.
User Password is: –— Clear A display-only field. Set is displayed when the general user
password is set, and Clear when it is not.
Set Supervisor
Password
–— [Enter] Sets, changes or cancels the Supervisor Password. The Supervisor Password may
be up to seven characters long and must include only letters or numbers (no
symbols). Passwords are NOT case-sensitive. To cancel a password press the
Enter key instead of entering characters in the Enter New Password field and in
the Re-enter New Password field. When a Supervisor Password is set it must be
used to access the BIOS setup utility.
Set User Password –— [Enter] This field can only be accessed if the Supervisor Password is set. Sets, changes or
cancels the User Password. A User Password may be up to seven characters long
and must include only letters or numbers (no symbols). Passwords are NOT
case-sensitive. To cancel a password press [Enter] key instead of entering char-
acters in the Enter New Password field and in the Re-enter New Password field.
When a User Password is set it must be used to access the BIOS setup utility.
Minimum User
Password Length:
–— [0] Supervisor can set password length (0 to 8) for user password. User cannot set a
password shorter than the minimum length.
Password on Boot:
■
Disabled
■
First Boot
■
Every Boot
[Disabled] When set to First Boot, a password (User or Supervisor) is required just once
after the Power On Self Test (POST) before the operating system will be read
from a disk. When set to Every Boot, a password (User or Supervisor) is required
every time after the Power On Self Test (POST) before the operating system will
be read from a disk. When set to Disabled no password is required.
On Automatic
Wake up:
■
Disabled
■
Enabled
[Disabled] When disabled, password entry is not required when the system wakes up auto-
matically. When enabled, password entry is required upon wake up.
KB Lock on
Resume:
■
Disabled
■
Enabled
[Disabled] When set to Enabled, the PS/2 mouse and keyboard inputs are locked out upon
Resume from Suspend or Save to Disk mode until you enter the password.
When set to Disabled no password is required. If no Supervisor Password is set,
this feature is not available and no password is required.
Boot from
Removable Media:
■
All
■
Supervisor only
[All] Supervisor only allows access to boot the computer to removable media after
the Supervisor Password is entered.
Flash Write:
■
Disabled
■
Enabled
[Enabled] When disabled, the BIOS Flash memory will be write protected.
Hard Disk Security: –— –— Configures hard disk security features
Owner
Information:
–— –— Sets Owner information.
TPM (Security
Chip) Setting
___ ___ Opens the Trusted Platform Module (TPM) Security Chip Setting submenu to
configure the Security Chip.
Security Panel on
Resume:
■
Disabled
■
Enabled
[Enabled] Enables or disables the Security Panel feature upon Resume from Suspend.