Filter
Top Products
70
6. Reset the pad counter.
• For Windows 98 / Windows Me / Windows 2000 /Windows XP
1) When turning on the power, check that the scanner is connected to your PC.
2) Open the [Scanners and Cameras] from the control panel of your PC.
3) Open the [Properties] of [fi-4530Cdj] from the [Scanners and Cameras].
4) The [Properties of fi-4530Cdj] dialogbox appears.
5) Click the "Device Set" tab. The following panel appears.
Click the [Clear] button beside the [Pad Counts] in [Pick Roller Counts], then click the
[OK] button. This resets the pad counter to "0".