Filter
Top Products
1-6
Panel Display
Button/LED Function
Name of the button and
LED
Function
Button Next
Displays the next LCD screen.
Previous
Displays the previous LCD screen.
Moves the cursor to the left.
Moves the cursor to the right.
Exit When you are entering settings on the Operator panel, pressing this button
returns you immediately to the Scanner Ready screen.
Enter
Enters the parameter currently selected by the cursor.
Send To/
Start
Operational only while the Read lamp lights when Manual start mode is set or
the video interface option is used, and starts the reading. Some application
software packages might use this button.
Stop Operarional only during the read operation when the video interface option is
used, and stops the reading.
When the Check LED lights, pressing this button releases the error status
(turns off Check and returns to the Scanner Ready screen). Also turns off the
Check lamp.
LED
Indicates that the scanner is On.
Read
Indicates the scanner is reading or ready to read.
Check
l If lit, this indicates that an alarm occurred. Pressing the Stop button
turns the Check lamp Off.
l If it blinks at one second intervals, this means that a jam or double feed
has been detected. If the problem is jammed paper, removing the jammed
paper turns off the Check lamp. If the problem is double feed, pressing
the Stop button turns off the Check lamp.
l If it blinks at four seconds intervals, this means that cleaning the ADF is
necessary.