Filter
Top Products
12
̙
Clean the fi-486PRRE, and the nozzle surface of the Print cartridge.
Cleaning the fi-486PRRE
Ink may spatter the vicinity of the print cartridge holder.
We recommend you to clean the scanner after 5000 sheets scanning to avoid smudge
on the scanned image.Note that the required cleaning cycle may very depending upon
document type to be scanned.
More frequent cleaning may be required when printing a document on which ink does not
easily get dry.
1) Press the Power button on the scanner operator panel and turn off the power.
2) Remove documents from the stacker. Pull up the lever on the right front of the
Upper transport unit and then raise it.
ATTENTION
For the cleaning, use lint-free cloth and wipe the parts gently.
CAUTION
Make sure that the Upper transport unit is locked before
you put your hands inside of the scanner.
Lever
Upper transport unit