Filter
Top Products
14
̙
Cleaning the Nozzle Surface of the Print Cartridge
Ink or stains stuck to the nozzle surface of the print cartridge or leaving the imprinter
unused for a while cause poor printing of characters because of blocked emission holes
in the nozzle. If your imprinter has this trouble, clean the nozzle surface of the print
cartridge.
1) Remove the Print cartridge.
Refer to the section "4.1 Replacing the Print Cartridge" (page16).
2) Gently wipe off dirt and stain from the Nozzle surface using dry lint-free cloth.
3) Make sure that dirt and stain are all removed and then install the cartridge.
Refer to the section "2.1 Installing the Print Cartridge" (page6).
ATTENTION
For the cleaning, use dry lint-free cloth and wipe the parts gently.
Wipe off dirt and stain gently from the nozzle surface.
Nozzle surface