Filter
Top Products
4
Figure 3. Tablet PC HEC - Top
Installing a PC Card, Memory Stick™, or SD Card
To install a PC Card, Memory Stick, or SD card while the
system is installed in the HEC, unzip the short zipper
located on the top edge of the HEC to gain access to the slots
(See Figure 3). After you have installed the card, re-zip the
zipper to ensure maximum protection.
Installing a Screen Protector
1. To ensure good adhesion, clean the exterior surface of
the HEC window with a soft cotton cloth dampened
with isopropyl alcohol before installing the screen pro-
tector. If streaking occurs, gently buff the surface with a
clean, soft cloth.
2. Install the screen protector in accordance with the
instructions contained in the “Care and Maintenance”
chapter of the system User’s Guide.
PC Card/Memory Stick/SD Card access
FPC58-1045-01 HEC.fm Page 4 Friday, December 19, 2003 1:09 PM