Filter
Top Products
FTP-633MCL400/FTP-623DCL002
■ OVERVIEW
This battery driven, micro line thermal printer offers high speed
printing for 3-inch wide paper (70 mm). It is suitable for portable
equipment that requires compact, lightweight components.
In addition to the interface board, a driving LSI (MCU + Gate
Array) is also available.
■ HIGHLIGHTS
• Driven by batteries (direct connect between thermal
head and batteries)
It can be driven by a broad range of voltages (4.2 to 8.5 V) of
NiCd or Nickel-Hydrogen by using Fujitsu Components'
unique head drive control system. The battery pack can be
connected directly to the print head without a voltage
regulator. Also, a lithium-ion battery can be applied.
• High speed printing
It can print at approximately 24 character lines/s (460
dotlines/s = 60 mm/s).
• Compact and lightweight
It has a light weight of approximately 84 g.
• Low power consumption
The peak current for head driving is approximately 3.0 A.
• Selectable paper paths
Front, rear and top paper insertion paths can be used.
• Paper auto loading function
Paper feeding is enabled by operating the head up lever.
• Variety of suitable paper
This model is capable of printing on a variety of papers,
including 1-ply roll paper, 2-ply paper (TCC and roll), labels,
and long-life paper.
BATTERY DRIVE, MICRO LINE THERMAL PRINTER
3” TYPE MECHANISM AND INTERFACE BOARD
FTP-633MCL400
FTP-623DCL002
FTP-623CU001, FTP-633GA101
1