Filter
Top Products
5
may fail to function properly depending on the software used.
l The PS/2 keyboard and mouse connectors are the same shape. Be sure the colors match to connect them
correctly. If they are forced in or connected incorrectly, the switch device may not only function
improperly but also may malfunction.
l USB connectors of this switch device are for keyboard or mouse only. Other USB devices does not work
at all.
l Set up the console’s keyboard and mouse with each host correctly. If they are not set correctly they will
not operate normally.
l Hook up the cables for each port to the same host. If the monitor port, keyboard port, and mouse port
numbers are wrong, you will not be able to select the host correctly.
l A DVI (Digital Video Interface) compatible display cannot be connected.
l The display monitor connected to this switch device should support multi-scan mode. And set its
resolution correctly. This switch device supports a resolution of 1600 x 1200 with a refresh rate of 75 Hz.
Also, the display may be off center after switching depending on the monitor and resolution settings.
Adjust the monitor or video card if this happens.
l Degradations in high resolution screen quality, such as ghosts or blurring, may be due to the monitor
cable or video card. Also, the screen may not display normally sometimes, depending on the particular
combination of display and video card. If this happens, try using a high grade cable or video card and
altering the connection environment.
l The monitor cable connector is a DB 15 HD type. You will need a monitor conversion connector
(available separately) to attach a Sun monitor that has a different shape connector. Make sure you
connect it in the correct orientation and use the fixing screws to hold it in place. It may cause trouble if it
is not connected properly.
l The [POWER] LED on the front panel flashes if the AC cord comes unplugged, reminding you to
reconnect it.
l Cascaded connections must be setup exclusively with our KVM switches only. You cannot make these
connections with switches produced by other manufacturers.
l A maximum of two levels of cascaded connections are allowed (including the master).
Attempting to cascade three or more levels will not work.
l When moving the KVM switch to a different location, use a box that protects the product from
bumping and shaking.
1.4. Disposal
This device consists of metal, plastic, electronic parts and so on. When it is disposed of, follow exactly the
relevant government regulations, instructions and so on.
CAUTION