Filter
Top Products
5–5
3 Insert the pad assembly into the ADF frame hole (the bigger one),
slide the assembly to the direction of the arrow until it clicks.
Pad assy
ADF frame
NOTICE: Pad can be replaced by aligning the holes of the pad with the pins of the Pad holder.
Figure 5.4 Pick Roller replacement
Guide A
Thumb Screw
Thumb Screw
5.4.3 Replacing pick roller
Replace the pickroller as follows.
a. Pull the cap up to open the ADF
unit.
b. Remove two thumb screws
shown in Figure 5.4. And re-
move the Guide A.
Pad
Pick spring
Pad holder