Filter
Top Products
C–1
APPENDIX C
C.1 Option
Name Specification Scanner Feature
IPC-2 CA01952-0191 M3093EX Image processing
M3093GX • Automatic separation
• Image emphasis
• Outline extraction
• Mirror image
• Dynamic threshold
• Noise suppression
• Smoothing
CMP-2 CA M3093GX • 4 Mbyte memory
• MH/MR/MMR compression
Contact your Fujitsu sales agent for more information.
C.2 IPC-2/CMP-2 option board installation
WARNING: Follow the outlined procedure to avoid danger from electrical components.
(1) Verify that the scanner power is turned off.
(2) Remove the AC cable from the rear of the scanner.
(3) Romove the two screws securing the power supply and the interface PCA assembly.
(4) Pull the power supply and the PCA assembly out slightly and remove the flat cabel
connector. Then pull out the entire assembly.
CAUTION: Do not pull on the flat cable too strongly or it may be damaged.
power supply and PCA assembly screw
Flat cable
(inside)