Fujitsu M3096GX Scanner User Manual


 
2 – 12
Error messages (device errors)
One of the following messages is displayed if an error occurs in the
scanner. If one of the following error messages is displayed, turn the
power off and then on again. If the same message is displayed,
contact your service representative.
mlAraLpma
eMinahcAlacmral
uFes
citplAlamraO
FtoMBromlArauFes–
Operation status messages
Operation status is displayed as shown by the following messages:
aWgnimrNpu–!!wo
RwoNniaegd!
Please clean Pick–roller
LFDA
e
004
da
2TH>.LG
yR
The power is on.
Reading is in progress.
The scanner is ready for operation in the manual mode.
Press the start button to start the read operation.
The power is on.
Reading is in progress.
The scanner is ready for operation in the manual mode.
Press the start button to start the read operation.