Fujitsu M3096GX Scanner User Manual


 
C – 2
(4) Remove the flat cable connector and detach the power supply and PCA assembly.
Flat cable connector
Flat cable
(5) Connect the IPC-2 option board connector and tighten the screw.
(6) Where a CMP-2 is installed, remove the screw from the memory board and detach the
memory board. Connect the CMP-2 option board connector and tighten the screw.
(7) Attach the power supply and PCA assembly in the reverse order of removal.
Screw for IPC-2
IPC-2 option board
Screw for memory or CMP-2 (M3096GX)
CMP-2 option board or memory PCA (M3096GX)
(not shown)