Fujitsu M4099D Scanner User Manual


 
IN-3
S
T
Product ID 6-34
Reading parameter 6-16
Ream weightr of paper 4-2
Resolution 6-7
RS232C baud rate 6-31
RS-232C interface 2-5
Scanner 1-1
Scanning mode 6-7
SCSI ID 6-33
SCSI interface 2-5
Screen transition 3-7, 3-8, 3-9, 6-3, 6-6,
6-48
Settings 6-7
Setup, Browse, and Test Modes 6-1
Setup items
Buzzer 6-23
Buzzer volume 6-25
Consumable counter 6-22
Drop-out color 6-20
Function key 6-43
Hopper height 6-16
Interface 6-29
IPC-3 mode 6-14
LCD contrast 6-26
Manual feed timeout 6-38
Paper feed retry 6-41
Paper length check 6-9
Paper pick retry 6-39
Paper separation level 6-18
Paper thickness check 6-10
Paper thickness setup 6-11
Pick start time 6-37
Picking speed 6-27
Pre-pick 6-35
Product-ID 6-34
RS-232C baud rate 6-31
SCSI-ID 6-33
Settings 6-7
Setup mode lock 6-45
Skew check 6-13
TP_IF baud rate 6-30
Setup mode 3-7, 6-1
Setup mode, contents of 6-4
Setup mode lock 6-45
SF2 did not detect leading edge of paper
6-18
Side cover 1-3
Skew check 6-13
Specifications 5-1
Stacker 1-3
Stacker extension 1-3
Stacker guide 1-3
START key 6-43
Satus display, transition of 3-9
Stop lever 1-1, 1-3
Temporary errors 1-7
Test items
Device life 6-53
Offline feed test 6-51
Options 6-53
Test mode 3-7, 6-47
Test mode, contents of 6-49
TP_IF baud rate 6-30
Transition of
screens in setup mode 6-6
operator panel status and display 3-9
Turning
the Power On 3-1
the main line switch off 2-4
Units 1-2
Units and Assemblies 1-2
Upper transport unit 1-3
R
U