Filter
Top Products
6-37
Pick start time
This function sets the period from when paper is manually put on the hopper to when the pick opera-
tion starts.
Remarks
In units of 0.2 second
LCD display
Pick start time
Options
00.2 S to 29.8 S (Default: 01.0 S)
1. In <<SETUP MODE>> initial screen, press
ENTER
.
The <<SETUP MODE>> menu screen
(Settings or Paper Length Check) appears.
NOTE
The “Settings” screen does not appear and
the “Paper Length Check” screen first ap-
pears when your scanner is not controlled
through the video or TP interface.
2. Press repeatedly until “Pick start time”
appears in the lower line of the menu screen.
3. Press
ENTER
.
The option select screen appears with the
current setting 01.0S blinking (blinking indi-
cates “changeable”).
4. Press or .
The displayed option changes (00.2S to
29.8S). The value changes in 0.2 seconds.
5. When the desired value appears, press
ENTER
to save the change.
The LCD returns to the <<SETUP MODE>>
menu screen (Pick start time).
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>>
Paper Length Check
<<SETUP MODE>>
Pick start time
Pick start time
05.0 S
Pick start time
01.0 S
<<SETUP MODE>>
Pick start time
The following is an example of operation when you use this function.