Filter
Top Products
5.1 Mode Parameters
h. RAC (report check) (not supported)
The HDD is not supported in this bit. Therefore, the HDD always report "0",
and ignore specified value.
i. SWP (soft write protect) (not supported)
This bit specifies whether or not to execute for the device server write
operation to the medium.
The HDD is not supported this bit. Therefore, the HDD always report "0", and
ignore specified value.
j. Autoload Mode (not supported)
These field specify the action method of asynchronous event reporting
protocol.
The HDD is not supported these field. Therefore, the HDD always report '0',
and ignore specified value.
k. Busy Timeout Period
The HDD does not support these fields. This means that the HDD always
reports "0" and ignores any value specified for one of these fields.
l. Extended self-test completion time
This field contains advisory data that an application client may use to
determine the time in seconds that the device server requires to complete an
extended self-test when the device server is not interrupted by subsequent
commands and no errors occur during execution of the self-test.
This field only use to report the value by the MODE SENSE / MODE SENSE
EXTENDED command.
Therefore, the HDD ignores specified value by the MODE SELECT / MODE
SELECT EXTENDED command.
C141-C013 307