Filter
Top Products
C156-E142-02EN 5 - 1
CHAPTER 5 OPERATION AND CLEANING
5.1 Operating Optical Disk Drive
5.2 Cleaning Drive
5.3 Optical Disk Cartridge Operation
5.4 Cleaning Optical Disk Cartridge
This chapter describes how to operate and clean the drive and the optical disk cartridges.
5.1 Operating Optical Disk Drive
The drive has an automatic load function. All the operator must do is to insert the optical disk
cartridge and operate the eject button.
This section explains loading and ejection methods, assuming that the drive is mounted
horizontally. (When mounted vertically, the drive is operated in the same manner as when
mounted horizontally.)
Figure 5.1 shows the front view of the optical disk drive. For operation, users should be familiar
with the parts in the figure and their function. Loading and ejection methods are described below.
5.1.1 Optical disk drive
Figure 5.1 Optical disk drive front view (with panel)
The following explains the parts and functions of the optical disk drive (the following numbers
correspond to the numbers in Figures 5.1):
2) Eject button/BUSY LED1) Disk insertion slot
3) Manual eject hole