Filter
Top Products
C156-F046-01EN 4-1
CHAPTER 4 RETURNING REPAIRED UNIT
4.1 Unpacking
4.2 Packing
4.3 Transportation
4.4 Storage
4.1 Unpacking
The following provides notes on unpacking a replacing MO disk drive:
•
Ensure flat and level working space, and pay attention to indication of upside
and downside on a package box. Avoid placing the unit directly on a firm
desk, etc. Handle a unit on a soft material such as rubber mat, etc.
•
When removing cushions, pay attention not to strain an MO disk drive.
•
When taking a unit out of an anti-static plastic bag, pay extra attention not to
strain printed circuit surface and interface connectors.
•
If an MO disk drive is moved into a place where room temperature changes
by 10 degrees Celsius, leave the unit packed for more than 2 hours after
moving, for avoiding condensation.
4.2 Packing
The following provides notes on packing a replaced MO disk drive:
•
For packing, use the same cushions and a box as those provided upon delivery
of a unit. If the same cushions and a box are unavailable, use a box with
cushions that do not give physical shock to an MO disk drive.
•
Pack an MO disk drive with an MO cartridge removed (with the carriage
locked).
•
When packing an MO disk drive, provide sufficient protection against damage
on printed circuit surface and interface connectors.
•
Put an MO disk drive into an anti-static plastic bag with desiccant.
•
Provide plainly visible signs indicating "THIS SIDE UP" and "HANDLE
WITH CARE" outside a box.
•
Other provided materials (AC adapter, cable, media, etc.) should be kept
separately. Do not pack them with an MO disk drive.