Fujitsu P2U3-0022-04ENZ0 Computer Drive User Manual


 
Chapter 1 Installing ETERNUSmgr
> 1.6 Procedure
ETERNUS Disk storage systems ETERNUSmgr Install Guide for Linux
14
Copyright 2009 FUJITSU LIMITED
P2U3-0022-04ENZ0
Note the following if you do not use the ETERNUSmgr e-mail notification function.
If the mail settings are correct, ETERNUSmgr sends an e-mail which includes the
following message to the administrator when ETERNUSmgr is started.
"ETERNUSmgr VxxLxx - HTTP Polling engine was started."
*VxxLxx refers to the version/level number.
If no e-mail is sent to the administrator when ETERNUSmgr is started, the mail settings
are incorrect. Check whether the contents of the setup file are correct, and if there are any
problems in the transmission link.
Refer to "Chapter 3 Startup and Shutdown" in "ETERNUSmgr User Guide -Introduction-"
for details of starting ETERNUSmgr.
5 Check setup.
If the settings are correct
Enter "y" and press the [Enter] key.
If the settings are incorrect
Enter "n" and press the [Enter] key.
This will return you to Step 1.
To terminate installation
Press the [Ctrl] + [C] keys simultaneously.
Installation will be terminated.
(message displayed)
# WWW Server URL= "http://domain-name/ETERNUSmgr"
# Target Type= "ETERNUS3000"
# Target Address= "0.0.0.0"
# ETERNUSmgr Admin Mail Address= "root@grmacm2"
#
# Configuration OK?
6 ETERNUSmgr environment setup is complete.
If environment setup has ended normally, the following message will be displayed.
(message displayed)
Setup of FJSVgrmgr succeed.
End of procedure
Follow the procedure above to copy the necessary files to the specified installation directory. See
"Chapter 2 Setup" in the "ETERNUSmgr User Guide -Introduction-" for the necessary setups of
the ETERNUSmgr operation.
Target Type
# Polling Server Type
TARGET_TYPE = Target Type specified in Step 1
(Name)
The "ADMIN_MAIL" parameter may be omitted in ETERNUSmgr in
order to disable the e-mail notification function. Note that the e-mail
notification function cannot be disabled by omitting the e-mail
address at installation, and the setup file must therefore be edited to
disable "ADMIN_MAIL". See "Chapter 2 Setup" in the
"ETERNUSmgr User Guide
-Introduction-" for details of editing the setup file.