Filter
Top Products
Chapter 1 Installing ETERNUSmgr
> 1.6 Procedure
ETERNUS Disk storage systems ETERNUSmgr Install Guide for Linux
17
Copyright 2009 FUJITSU LIMITED
P2U3-0022-04ENZ0
www/menu.htm
This file contains ETERNUSmgr Top Menu.
To use this file, copy it to a directory under the Web server where the top menu is stored.
During installation, there is no need to copy this file to the specified directory under the top
menu if the default directory is used. In this case, make a backup of this file ("menu.htm") and
save it under a different name.
www/fujitsu.gif, www/eternus.gif
These are the images used by the ETERNUSmgr screens.
To use them, copy them to a directory under the Web server where the top menu is stored.
During installation, there is no need to copy these files to the specified directory under the top
menu.
setup/
The directory storing the file that the environment setup script uses for environment setup of
ETERNUSmgr.
See "ETERNUSmgr User Guide -Introduction-" for the procedures for editing individual files.
• The "www/index.htm," "www/menu.htm," "www/fujitsu.gif" and "www/
eternus.gif" files must be copied to the same directory under the Web
server where ETERNUSmgr Top Menu is stored.
• Always perform the copy operation stated above when
ETERNUSmgr is in a stopped state. In addition, if the copy
destination of files "www/index.htm," "www/menu.htm," "www/
fujitsu.gif" and "www/eternus.gif" is different from the location at
installation, make sure to copy them to the same directory, edit all the
setup files ("STX~.INI"), and specify the copy destination for
"HMTL_ALARMFILE_PATH". Also, set the link to the alarm file for
each device described under "Show hardware error detect log list" in
the top menu ("menu.htm") to be the same as the setup file's
"HTML_ ALARMFILE_PATH".