Filter
Top Products
Chapter 1 Installing ETERNUSmgr
> 1.6 Procedure
ETERNUS Disk storage systems ETERNUSmgr Install Guide for Linux
15
Copyright 2009 FUJITSU LIMITED
P2U3-0022-04ENZ0
• Target Flag
# Polling Server Flag
TARGET_FLAG = Device type flag specified in Step 1
(1 = ETERNUS3000, GR710, GR720,
GR730, 2 = ETERNUS6000, GR740, GR820, GR840, 4 = ETERNUS2000, ETERNUS4000,
ETERNUS8000, ETERNUS DX400 series, ETERNUS DX8000 series)
If "1=ETERNUS DX400 series" was selected in Step 1
, then "TARGET_TYPE=ETERNUS
DX400".
If "2=ETERNUS DX8000 series" was selected in Step 1, then "TARGET_TYPE=ETERNUS
DX8000".
The target type name can be modified post-installation.
• Target Address
# Polling Server Address
TARGET_ADDR = Target Address specified in Step 3
• Admin Mail Address
# Admin Mail Address
ADMIN_MAIL = Mail address specified in Step 4
• Alarm History Index URL
# HTTP Server URL
HTML_ALARMFILE_URL = URL specified in Step 2
followed by "/html_1"
• Log Files Directory
# Log File Saved PATH
LOGFILE_PATH = Installation directory followed by "/log_1"
The parameters of the setup file can be edited after executing the environment setup script.
The settings to operate ETERNUSmgr by the Web are contained in ETERNUSmgr Top Menu
directory (default is "/opt/FJSVgrmgr/www"). For information on how to perform these settings,
refer to the Web server manual for further details.
The following files are stored in the installation directory, after installation by rpm and
ETERNUSmgr environment setup.
• stxpolld
• stxchk
• _STXPOLL.INI
• STXPOLL_1.INI
• stxpoll
• stxpollset.sh
• www/index.htm
• www/menu.htm
• www/fujitsu.gif, www/eternus.gif
The following explains each file and directory:
stxpolld
ETERNUSmgr daemon.
stxchk
Checks the ETERNUSmgr setup file.