Filter
Top Products
35
■ Installing and Removing the Hard Disk Drives
Open the casing (see "Opening the casing").
Removing a hard disk drive
1 Press the EasyChange rails mounted on the hard disk drive together somewhat (1) and
pull the hard disk drive out of the case in the direction of the arrow (2).
2 Disconnect all cables connected to the drive (data cable, power supply cable).
1
1
2
2 Disconnect all cables connected to the drive (data cable, power supply cable).
It may be necessary to modify the entry for the drive in the BIOS Setup.
4 Connect the cables to the hard disk drive.
4 Close the casing (see "Closing the casing").
CHAPTER 4 Washingtons (27-38) 16/10/2002, 4:13 PM35