Chapter 1 Workflow
> 1.2 When the Multipath Driver is Used
ETERNUS DX Disk storage systems Server Connection Guide (Fibre Channel) for Linux
15
Copyright 2010 FUJITSU LIMITED
P3AM-3842-05ENZ0
Workflow
Install and Set Up ETERNUSmgr
Install and set up the ETERNUSmgr software (if it is to be used).
Refer
- "Chapter 4 Installing and Setting Up the ETERNUSmgr" (page 25)
- "Chapter 5 Setting Up the ETERNUS DX Disk Storage Systems" (page 26)
- Check Web GUI operation.
• "Web GUI User Guide"
- Install ETERNUSmgr.
• "ETERNUSmgr Install Guide"
- Check ETERNUSmgr operation.
• "ETERNUSmgr User Guide"
- Set up the ETERNUS DX Disk storage system.
• "ETERNUS DX Disk storage systems Server Connection Guide (Fibre Channel)
ETERNUS DX Disk Storage System Settings for ETERNUS DX60/DX80/DX90"
• "ETERNUS DX Disk storage systems Server Connection Guide (Fibre Channel)
ETERNUS DX Disk Storage System Settings for ETERNUS DX400/DX8000 series"
Set Up the Fibre Channel Switch
If a Fibre Channel switch is to be used, set it up and connect it now.
Refer
- "Chapter 6 Setting the Fibre Channel Switches" (page 27)
- Set up the Fibre Channel switch.
• "ETERNUS DX Disk storage systems Server Connection Guide (Fibre Channel)
Fibre Channel Switch Settings"
- Check the Fibre Channel switch connection requirements.
• "Server Support Matrix for FC-SWITCH"