Filter
Top Products
Chapter 1 Workflow
> 1.2 When the Multipath Driver is Used
ETERNUS DX Disk storage systems Server Connection Guide (Fibre Channel) for Linux
16
Copyright 2010 FUJITSU LIMITED
P3AM-3842-05ENZ0
Install the Fibre Channel Card Driver
Install the appropriate driver for the Fibre Channel card being used.
Applicable manual varies according to the server, OS, and Fibre Channel Card type being
used. Select from the following list.
Refer
- "Chapter 7 Installing and Setting Up the Drivers" (page 28)
- Mount cards, install drivers, and perform setup.
• "Driver Settings for PRIMERGY/PRIMEQUEST 1000 Series"
- Mount cards, install drivers, and perform setup.
• "Driver Settings for PRIMEQUEST 500/400 Series"
- Mount cards, install drivers, and perform setup.
• "Driver Settings for Red Hat Enterprise Linux on Other Brand Servers with Emulex
Fibre Channel Cards"
- Mount cards, install drivers, and perform setup.
• "Driver Settings for Red Hat Enterprise Linux on Other Brand Servers with QLogic
Fibre Channel Cards"
- Mount cards, install drivers, and perform setup.
• "Driver Settings for SUSE Linux Enterprise Server on Other Brand Server with
Emulex Fibre Channel Cards"
- Mount cards, install drivers, and perform setup.
• "Driver Settings for SUSE Linux Enterprise Server on Other Brand Servers with
QLogic Fibre Channel Cards"
- Check the Fibre Channel Card driver versions.
• "Server Support Matrix"
For ETERNUS Multipath
Driver
For VERITAS Volume
Manager
For device-mapper
multipath