Fujitsu PG-FCS103 Network Card User Manual


 
5 Broadcom Advanced Control Suite 2 (BACS2) 181
E
10 Click the probe target at the top of the list, click "Edit Target IP
Address", type the target IP address in the "IP Address" box for
one or all probe targets, and then click [OK]. Click [Next].
` Only the first probe target is required. You can specify up to three additional probe
targets to serve as backups by assigning IP addresses to the other probe targets.
11 Click a listed team member, click "Edit Member IP Address", and
then type the member IP address in the IP Address box. Repeat
for all listed team members and then click [OK]. Click [Next].
` All of the member IP addresses must be in the same subnet as the subnet of the
probe targets.