Filter
Top Products
6
LifeBook Q2000 Series BIOS
Drive0 Submenu of the Main Menu
The Drive0 submenu identifies what ATA devices are installed.
Figure 2. Drive0 Master Submenu
Table 2: Fields, Options and Defaults for the Drive0 Submenu of the Main Menu
Menu Field Options Default Description
Type:
■
Auto
■
None
[Auto] Selects the hard drive device type. Select Auto to have the type automatically
identified by the BIOS at POST. If None is selected, all of the following Setup
items do not appear.
LBA Format Logical Block Addressing (LBA)
Total Sectors:
___
--- The total number of sectors on your hard disk
Maximum Capacity:
___
--- The maximum capacity of your hard disk
Multi-Sector Transfers:
___
[16 Sectors] This option cannot be changed when Auto is selected; it is automatically
selected.
LBA Mode Control:
___
[Enabled] Enables or disables logical Block Addressing in place of Cylinder, Head, Sector
addressing. This option cannot be changed when Auto is selected; it is auto-
matically selected.
Transfer Mode:
___
[Multiword
DMA 2]
This option cannot be changed when Auto is selected; it is automatically
selected. Selects the method for moving data to/from the drive. Autotype the
drive to select the optimum transfer mode.
Ultra DMA Mode:
___
[Disabled] This option cannot be changed when Auto is selected; it is automatically
selected. Selects the method for moving data to/from the drive. Autotype the
drive to select the optimum transfer mode.
PhoenixBIOS Setup Utility
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
Main
Item Specific Help
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Drive0 [TOSHIBA MK6006GAH]
Type: [Auto]]
LBA Format
Total Sectors: 117210240
Maximum Capacity: 60012MB
Multi-Sector Transfers: [16 Sectors]
LBA Mode Control: [Enabled]
Transfer Mode: [Multiword DMA 2]
Ultra DMA Mode: [Disabled]
▲