Filter
Top Products
System Configurator and Order-Information Guide
Start PRIMERGY RXI300
PRIMERGY RXI300 Status 2008-01-29
Section
I
Basic unit
PRIMERGY RXI300
Basic Unit including:
2U Chassis with
Rack unit 2U - 3 bays for 350W hot-plug power supply moduls,
2 hot plug moduls installed, 3rd modul req. for redundancy
Basic unit with: (PSU redundancy restricted to 240V operation),
- 1x Itanium 2 processor (max 2) 2 sep. AC inlets
- 2xSCSI HD drive bays with hot swap backplane
4 GB main memory - Fan unit with 6x60mm hot swap, variable speed fans
1.6GHz / 3MB TLC (Madison) S26361-K963-V210 - I/O Riser board with 3 PCI-X slots
9015 (1.4GHz/12MB TLC) (Montecito) S26361-K963-V944 2xPCI-X long with 100MHz
1xPCI-X long with 133MHz
- 1x IDE CDROM/DVD-ROM Combodrive
- Front panel board and front bezel
* Rack- mounting kit (sliding rail´s)
- telescopic rails kit
- cable management arm
* Systemboard with
- 2 Itanium CPU sockets
S26113-F602-E350 one CPU installed according to the configurator
3rd power supply module (PSU) thermal blank in other socket if 2nd CPU not installed
for 2+1 redundancy (350W) - 2 memory banks with 4 DIMM memory slots each
max. 1x per system for up to 16GB PC2100 registered DDR RAM with ECC
one bank installed according to the configurator
- onboard dual channel Ultra 320 SCSI
first ch.for int. Drives (SCSI backplane), RAID 1 support
second ch. for ext. SCSI devices
- dual port LAN-Controller 10/100/1000TX
- VGA Controller (8MB RAM) on-board (ATI Rage XL)
- External Interfaces:
PRIMERGY PRIMECENTER- Rack 1x RS-232 (serial, RJ45 connector) in back
2x VGA ports, 1 in front, 1 in back
"Rack-mounting ex factory" 4x USB 1.1, 2 in front, 2 in back
SNP:SY-F1647E301-P This service is to be ordered once 2x LAN 10/100/1000 (RJ45) in back
Installation ex works for one per installable server/storage 1xVHDCI SCSI connector
server or subsystem. subsystem, in order to get the no PS/2 connection for KB / Mouse
Hereby the rack will be delivered server/storage subsystem (USB connectivity must be used instead)
completely pre-mounted and mounted into the PRIMERGY racks. IA64 Server Support CD, User Manual
all wired connections are tested. In case of the 46 U PRIMERGY rack,
With racks 12U, 24U, 38U: this service has to be ordered,
Systems and components to get the mounting kits and the ServerView:
will be delivered installed in the rack cables installed FSC IA64 Server Support CD
With racks 46U: for EFI service partition
Systems and components
will be delivered separately
To be ordered only together with
a PRIMERGY- Mounting kit for PRIMERGY RXI300 is part of the basic unit
PRIMECENTER rack - 1 pair of telescopic rails (647 - 810mm)
e.g.: - 1 bracket DC-PC-Rack
S26361-K826-V10x - 1 cable management for DC-PC-racks
refer configurator PC-Rack Mounting kit for mounting of servers in in FSC 19" DataCenter- and
max. 1x per System
PRIMECENTER- racks and all server racks conforming to EIA standard
EIA-310-D for 19" racks.
Therefore the mounting kit is variable in depth from 647 - 810mm
- Connetion for KVM switch / Rack console
- RC22 can be directly connected (both USB and PS/2 connections)
- KVM S2 series needs the KVM S2 adapter USB-VGA
- For PS/2 KVM "S1" series as well as for standard PS/2 KB / Mouse
an additional USB to PS/2 adapter must be bought additionally and
connected to the RXI600. The adapter offers 2 x PS/2 ports.
Adaper order number, to purchase via PRIMEPOWER, is
D:GP70P-KA01 Adapter for PS/2<->USB
- Appropriate FSC USB keyboard is S26381-K340-V1*
This keyboard also needs USB cable T26139-Y3812-V1
A
Fujitsu Siemens Computers
Enterprise Products PRIMERGY Server
5 of 10