System Configurator and Order-Information Guide
B
PRIMERGY RXI300 Status 2008-01-29
Section
V
SCSI / Fibre Channel Controller
included in the basic unit The system is equipped with a onboard dual channel Ultra 320 SCSI controller.
onboard 2 ch.SCSI Controller U320
one channel can be connected to internal devices via the SCSI blackplane.
connectivity
The two int. HDD's can be mirrored if they are connected to the
1) for int. Drives, RAID 1 on-board controller with hot swap support.
2) ext. VHDCI
The other SCSI channel can be used by external SCSI devices.
Fibre Channel controller for subsystems and SAN
S26361-F3141-E10
2GBit/s FC Controller
Emulex
LP1050, full height bracket
1 channel 2GBit/sec FC controller
LC Interface for 50um Fiber
PCI-X 64Bit / 133MHz, 170mm
3.3V / 5V tolerant signaling
max. 2x per system
Section
VI
Disk Array
Additional RAID Controllers for connection of external Disk Arrays in Subsystem SX31
S26361-F3006-E128
The cables of the connection from the
2-channel RAID Controller U320
subsystems (SX30) to the Raid
LSI
Controllers, see configurator SX30
320-2
128MB SDRAM ECC Cache
RAID 0, 1, 10, 5 & 50
default with TBBU
plug: internal 1x HD68;
external: 1x VHDCI
without cable
incl. SW and description (Ger/US)
64/66 PCI controller, 180mm
3.3V and 5V tolerant signaling
max. 2x per system
All Controllers for the connection of external storage systems are delivered without cables.
For the configuration of external cabling see the configurator for external storage systems.
C
Fujitsu Siemens Computers
Enterprise Products PRIMERGY Server
7 of 10