Filter
Top Products
System Configurator and Order-Information Guide
A
PRIMERGY RXI300 Status 2008-01-29
Section
II
Processor
A two-way-processor system requires a multi-processor operating system.
Later upgrading to a two-way-processor system is also possible.
For a CPU extension the further CPUs must be of identical TLC (third level cache) and clock rate.
S26361-F3071-E263 S26361-F3071-E412
Itanium 2
1.6 GHz
Itanium 2
9015
1.4GHz
up to
with
3 MB
TLC on Chip, with
12 MB
TLC on Chip,
1x heat sink and "Easy retention" heat sink and "Easy retention"
(Intel Codename "Fanwood")
occupies 2nd CPU socket occupies 2nd CPU socket
max. 1x per system max. 1x per system
Section
III
Memory
There are 8 memory slots available (2 banks, 4 modules each).
They can optionally be equipped with 1GB or 2GB registered DDR-RAM modules (PC2100).
The maximal extension is 16GB with 2GB modules!
Any mix of modules within one memory bank is not allowed.
One memory bank is allready occupied
S26361-F3070-E400 S26361-F3070-E800
Main memory 4 GB Main memory 8 GB
PC2100 registered DDR RAM PC2100 registered DDR RAM
up to
1x
consisting of 4 modules consisting of 4 modules
with 1 GB each with 2 GB each
occupies one bank occupies one bank
max. 1x per system max. 1x per system
Section
IV
Hard disk drives
S26361-F3066-E173 S26361-F3066-E114
Hard disk 73GB / 10K Hard disk 146GB / 10K
10000rpm,<5.5ms, min. 8MB Cache 10000rpm,<5.5ms, min. 8MB Cache
Ultra 320 SCSI (320MB/s) Ultra 320 SCSI (320MB/s)
Interface: Wide SCA (80-pin) Interface: Wide SCA (80-pin)
hot plug/hot replace tray hot plug/hot replace tray
occupies one 1" bay occupies one 1" bay
onb. SCCI or RAID Controller onb. SCCI or RAID Controller
max. 2x per system max. 2x per system
up to
2x
S26361-F3066-E130 S26361-F3066-E573
Hard disk 300GB / 10K Hard disk 73GB / 15K
10000rpm,<5.5ms, min. 8MB Cache 15000rpm,<4ms, min. 8MB Cache
Ultra 320 SCSI (320MB/s) Ultra 320 SCSI (320MB/s)
Interface: Wide SCA (80-pin) Interface: Wide SCA (80-pin)
hot plug/hot replace tray hot plug/hot replace tray
occupies one 1" bay occupies one 1" bay
onb. SCCI or RAID Controller onb. SCCI or RAID Controller
max. 2x per system max. 2x per system
Standard PRIMERGY harddisks must be ordered for upgrade.
To use these harddisks in the RXI300 a simple frame change must be carried out.
Upgrade harddisks are always delivered with standard PRIMERGY harddisk frames.
Unused harddisk positions in the PRIMERGY RXI300 are always equipped with fully
functional empty harddisk frames. Therefore, after the standard frame is removed, the
harddisk has to be mounted in the RXI300 specific empty frame.
The following harddisks are technically released for usage in the PRIMERGY RXI300:
S26361-F3121-L173 HDD U320 10k 73GB hot plug 1"
S26361-F3121-L114 HDD U320 10k 146GB hot plug 1"
S26361-F3121-L130 HDD U320 10k 300GB hot plug 1"
S26361-F3121-L573 HDD U320 15k 73GB hot plug 1"
B
Fujitsu Siemens Computers
Enterprise Products PRIMERGY Server
6 of 10