Filter
Top Products
7
Sectors:
■
A number
between 0
and 63
–— This item appears only when Auto is selected and the type is
identified as hard disk, or User is selected. When User is selected,
you can change the value. This field is changed by incrementing
(pressing the [Spacebar]) or by typing in the number.
Maximum
Capacity:
Display only –— Displays the maximum capacity of the drive calculated from the
parameters of the hard disk when Auto is selected and the type
is identified as hard disk, or User is selected.
Multi-Sector
Transfers:
■
Disabled
■
2 Sectors
■
4 Sectors
■
8 Sectors
■
16 Sectors
■
32 Sectors
■
64 Sectors
■
128 Sectors
[16 Sectors] This option cannot be changed when Auto is selected. Specify the
number of sectors per block for multiple sector transfer. MAX refers
to the size the disk returns when required.
LBA Mode Control:
■
Disabled
■
Enabled
[Enabled] Enables or disables logical Block Addressing in place of Cylinder,
Head, Sector addressing. This option cannot be changed when
Auto is selected.
PIO Transfer
Mode:
■
Standard
■
Fast PIO 1
■
Fast PIO 2
■
Fast PIO 3
■
Fast PIO 4
[Fast PI0 4] Selects the method for moving data to/from the drive. Autotype
the drive to select the optimum transfer mode. This option cannot
be changed when Auto is selected. Multi-word DMA is automati-
cally set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3, and set to
mode 2 for Fast PIO 4 / DMA.
DMA Transfer
Mode:
■
Disabled
■
Multiword
DMA 1
■
Multiword
DMA 2
■
Ultra DMA 0
■
Ultra DMA 1
■
Ultra DMA 2
[Ultra DMA 2] Selects the method for moving data to/from the drive. Autotype
the drive to select the optimum transfer mode. This option cannot
be changed when Auto is selected.
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field Options Default Description
CAUTION
A bootable CD-ROM may have either a floppy disk for-
mat or a hard drive format. When the bootable CD-
ROM is used, the drive allocations change automatically
without changing the BIOS setup. If a floppy disk for-
mat CD-ROM is used, the CD-ROM becomes Drive A.
The CD-ROM will only take drive C: (hard drive format)
if the internal hard drive is not present or is disabled.
The bootable CD-ROM can never use a C: designation
if a formatted internal hard drive is present since the C:
designator is always reserved for the internal hard
drive.The boot sequence ignores the new drive designa-
tions, however, your application software will use the
new designations.
CAUTION
Be careful of the operating environment when booting
from a CD-ROM or you may overwrite files by mistake.
Main Menu
Fennel BIOS.fm Page 7 Monday, November 12, 2001 10:52 AM