Filter
Top Products
3-16
3
Using the NI / 5E Custom Terminal Set-Up
Selecting
Ringer Pattern
2.
ENTER
1: LOW 2: MEDIUM
3: HIGH (SELECT 1-3)
3. Press the desired tone number. The phone rings
once at the selected tone.
4. When you hear a tone you like, press ENTER.
The following screen is shown:
LOW
COMPLETED
Select either normal ring or silent ring. Silent ring
flashes the LED of the receiving DN or CA button
without ringing the bell.
To set the ringer mode, enter Ringer Service Mode
then choose option 3:
1.
3 ENTER
RINGING MODE
BELL
2.
ENTER
1: BELL 2: SILENT
(SELECT 1-2)
3. Press the ringing option, then ENTER. The
following screen is shown:
SILENT
COMPLETED
To change another setting, you can press asterisk
(*) to return to the menu mode options.
This selection determines the type of ring that
announces incoming calls when you are talking on
another line.
Selecting
Ringer Pattern
Mode