Filter
Top Products
5-5
5
NI / 5E Custom Terminal Installation
ENTER SPID
ID=000000000000
2. Dial your voice SPID number and press ENTER.
SPID ASSIGNMENT END
COMPLETED
Note: For first time installations, download will
occur without plugging and unplugging the
set.
At initial installation, when you press ENTER to
confirm the SPID, the terminal automatically
requests a download from the switch. This
downloading function will work on switches that
support parameter downloading and on early
versions of the DMS that supports Service Profile
Management downloading (SPM). On other
switches, manual configuration of features and
lines may be necessary.
Although each service provider can decide the
number of characters and format of the SPID,
most have agreed on a simple format. This
format, referred to as generic SPID format, is likely
the format used by your service provider.
Note:
The generic SPID format consists of 14 digits: (10
digit DN) + 4 digits (usually “0101”.)
The first component is the main telephone number
of the terminal, including the area code. For
example, 9197962000.
The most frequently assigned SPID will be the
following: NPA NXX XXXX 0101.
On the DMS NI 1, at initial installation, and after
the SPM download, it may be necessary to change
the settings in the terminal to allow proper
installation. Please read the section on
NI ONLY