Filter
Top Products
3-17
3
Using the NI / 5E Custom Terminal Set-Up
Before you can dial a leased network number, or
program a one-touch button to dial such a number,
you must assign one of your multifunction button
as a leased network access code delimiter key.
To assign one of the multifunction buttons as the
delimiter key for entering leased network access
codes, follow these steps:
1.
OPTIONS
9 ENTER
USER CODE MODE
SELECT ASSIGN KEY
The indicator of any one-touch buttons you have
assigned, and the MIC-OFF key if activated, turn
red.
2. Press the multifunction button you have
chosen to be the delimiter key and then press
ENTER.
The indicator for the button you have chosen turns
green and its number appears on the display.
Assigning a
Leased Network
Access Code
Delimiter
5E CUSTOM ONLY
To select the ringer mode, enter Ringer Service
Mode then choose option 4.
1.
4 ENTER
RINGER PATTERN MODE
MUTE RING
2.
ENTER
1: MUTE RING 2: ONE RING
(SELECT 1-2)
3. Press the desired option, then ENTER. The
following screen is shown:
MUTE RING
COMPLETED