Fujitsu T4010 Laptop User Manual


 
7
Heads:
A number between
1 and 16
–— This item is active only when Hard Disk is selected as type. You can
change the value by incrementing (pressing the [Spacebar]) or by
typing in the number.
Sectors:
A number between
0 and 63
–— This item is active only when Hard Disk is selected as type. You can
change the value by incrementing (pressing the [Spacebar]) or by
typing in the number.
Maximum
Capacity:
Display only –— Displays the maximum capacity of the drive calculated from the
parameters of the hard disk when Auto is selected and the type
is identified as hard disk.
Multi-Sector
Transfers:
Disabled
2 Sectors
4 Sectors
8 Sectors
16 Sectors
[16 Sectors] This option cannot be changed when Auto is selected. Specify the
number of sectors per block for multiple sector transfer.
LBA Mode Control:
Disabled
Enabled
[Enabled] Enables or disables logical Block Addressing in place of Cylinder,
Head, Sector addressing. This option cannot be changed when Auto
is selected.
Transfer Mode:
Standard
Fast PIO 1
Fast PIO 2
Fast PIO 3
Fast PIO 4
Multiword DMA 1
Multiword DMA 2
[Multiword
DMA 2]
Selects the method for moving data to/from the drive. Autotype the
drive to select the optimum transfer mode. This option cannot be
changed when Auto is selected.
Ultra DMA Mode:
Disabled
Mode 0
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
[Disabled] Selects the method for moving data to/from the drive. Autotype the
drive to select the optimum transfer mode. This option cannot be
changed when Auto is selected.
Menu Field Options Default Description
A bootable CD-ROM may have either a floppy disk or hard drive format. When the bootable CD-ROM is
used, the drive allocations change automatically without changing the BIOS setup. If a floppy disk format
CD-ROM is used, the CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive for-
mat) if the internal hard drive is not present or is disabled. The bootable CD-ROM can never use a C: des-
ignation if a formatted internal hard drive is present since the C: designator is always reserved for the
internal hard drive.The boot sequence ignores the new drive designations, however, your application soft-
ware will use the new designations.
Be careful of the operating environment when booting from a CD-ROM or you may overwrite files by
mistake.
Main Menu