Garmin TR-1 Computer Monitor User Manual


 
You are responsible for the safe and prudent operation of
your vessel. Your TR-1 Autopilot is a tool that will enhance
your capability to operate your boat and catch sh. It does
not relieve you from the responsibility for safe operation
of your vessel. You must avoid hazards to navigation and
never leave the helm unattended.
You must always be prepared to promptly regain manual control of your
boat. The autopilot can fail and hard over.
Learn to operate your autopilot on calm and hazard free open water.
In case the autopilot becomes inoperable, remove the in line fuse from the
battery power cable.
If available, always use the engine kill lanyard when operating your boat.
Use caution when operating the autopilot at high speeds near hazards in the water, such as docks,
pilings or other boats.
Safety
Before Starting Installation
Study this manual and the other manuals provided with your autopilot
carefully, and familiarize yourself with all of the components and
their intended or required mounting locations. Ensure there is
adequate space available for installation before cutting or drilling
holes. Take extreme care when cutting and drilling, to avoid the
possibility of damaging other components in the boat, and avoid
possible personal injury. Be sure to follow the instructions carefully
and thoroughly. Nautamatic Marine Systems, Inc. cannot accept
reasonability for installations where the instructions have not been
followed, where substitute parts have been used, or modications
have been made to our products.
Page 2