Filter
Top Products
2
Installation
To Install the MapSource Software Upgrade including
USB Data Card Programmer Support :
1. Insert the Programmer CD-ROM into your computer’s CD-ROM drive.
2. Click the Start button and select “Run...”
3. Then type in the drive letter of your CD-ROM drive followed by the
MapSource Update file name: MSUPDATE.EXE. (For example
d:\msupdate.exe)
4. Press ENTER and follow on-screen instructions.
5. Open MapSource and check the “About” box in the help file to
determine that you have successfully installed Version 3.04 or later.
6. Follow instructions contained in the MapSource Addendum
provided with the USB Data Card Programmer for transfer of map
data to and from Data Cards using the Programmer.
Installing the Device Drivers
5. The next screen will display a list of locations to search for the new
drivers. Select CD-ROM Device from the list and click on “Next”.
Make certain all other boxes remain unchecked.
6. The Wizard will search for the driver and then display a window to
tell you it is ready to install. Click on “Next”. You may see a
“Copying Files...” screen which tells you the file cannot be found.
Choose Root Directory of the CD-ROM drive if not already there,
and to try copying again. Click “OK” to continue.
7. When installation is complete a window will display that shows
the device name (GARMIN USB Data Card Programmer) and states
the driver installation is finished. Click on “Finish” .
8. A final window will appear telling you that operating software for
the Card Programmer is being installed. Leave the CD-ROM in the
CD-ROM drive to complete the MapSource Software Upgrade.
Installing the MapSource
Software Upgrade